Machine Tool Automation Products

Our company is engaged in offering a wide range of CNC Controlller, 2 Axes CNC Control - for Lathe Applications (Model - 2T / 2TG), which is compact, low cost, computerized numerical control for metal cutting machine tools and other equipment requiring positioning and contouring axes. Being menu driven, this CNC controller offers an easy-to-use, cost effective motion control for a wide variety of manufacturers.

Features:

• 
  Control of up to two axes plus spindle  feedback inputs : 4 (2 axes + spindle + MPG)
• 8" green CRT display (optional 9") analog outputs : 3 (2 axes + spindle)
• 2D linear and circular interpolation
• CMOS RAM memory for storing MSD, tool data, "M" functions and part programs (32K)
• High resolution for high accuracy * Control resolution is 0.001 mm / 0.0001 inch
• Self-charging battery for memory retention up to one month
• Internal feedback multipliers facilitate various Feedback resolutions of: 0.0005 mm, 0.001 mm, 0.002 mm, 0.0025 mm, 0.005 mm 0.01 mm per pulse or 0.00005 in, 0.0001 in, 0.0002 in, 0.00025 in, 0.0005 in, 0.001 in per pulse
• MSD parameters may be entered using keyboard or from a PC using serial port
• MSD parameters are displayed in an easy-to-read menu for simple selection and entry
• Standard and Parametric Subroutines
• Standard and user defined Canned Cycles and BCD Output for M2 functions and T2 functions
• Spindle orientation ,BCD Output for S2 or S4 functions
• Scaling , 15 decoded "M" outputs parametrically defined and
• Geometric aids simplify programming assignable to 32 M codes
• Optical Encoder or Scale feedback, Cyc On, Jog Mode, Threadcutting On, Axes Enable,
• Graphic programming assistance Emergency and Reset Outputs
• DNC/ Simultaneous programming
• Optical Encoder or Scale feedback Operation
• Metric or inch feedback is selectable by MSD, Manual data entry via keyboard
• Operator-friendly, menu driven program input ,Part Program editing
• Metric / inch programming , Absolute / Incremental programming
• Operation Modes
• Auto, Single Block, Dry Run, Jog / Zero setting, Editing, Peripherals, Tool Offsets, Special Modes
• Direct Feedrate programming
• Programmable Dwell , Feedrate Override (0 to 100%)
• Programmable zero offset by G92 * Spindle Speed Override (50 to 120%)
• Two axes simultaneous rapid traverse (G00) * Continuous and Incremental Jog
• Up to 30 m/min without controlled path * MPG Interface
• Full spindle control 1 to 9999 rpm * Tool Inspection during program execution
• S4 for analog control
• S2 or S4 output in BCD Programming
• Spindle Creep command for gear and tool changes * Program entry in ISO code & Assisted program entry
• Math functions, conditional jumps * RS232 (V24) port for PC communication and DNC
• 32 tool offset files (length and wear compensation, * Programmable Feed Rate and Spindle Speed
• Location code and tool radius) * Number of Main Programms: 250
• Tool Compensation , Number of Repetitions of subprograms: 99,99
• Programmable Position Loop Gain , Number of Repetitions of Para. subroutines: 99,99
• Lag limit protection
• Manual zero offsets (G53 - G59) , self dignostics
• Programming, overtemprature and hardware errors
• Radius / diameter programming for X axis
• Spindle speed display - requires encoder , interface errors
• Conditional input for M01 and conditional blocks ,software travel limits
• Leadscrew backlash compensation ,transmission errors
• Leadscrew error compensation , input / output status

Send Enquiry

Our company  is engaged in supplying a wide range of 3 Axes CNC Control - for Milling Applications - (Model - 3M / 3MG)],which offers an easy-to-use, cost effective motion control for a wide variety of manufacturers. These have a CMOS RAM memory for storing MSD, Tool Data, "M" functions and part programs (32K) and a compact, low cost, computerized numerical control for metal cutting machine tools and other equipment requiring positioning and contouring axes.

Features:

• 
  Control of up to two axes plus spindle * Feedback Inputs : 4 (2 axes + Spindle + MPG)
• 8" green CRT display (optional 9") * Analog Outputs : 3 (2 axes + Spindle)
• 2D linear and circular interpolation
• CMOS RAM memory for storing MSD, Tool Data, "M" functions and part programs (32K)
• High resolution for high accuracy * Control resolution is 0.001 mm / 0.0001 inch
• Self-charging battery for memory retention up to one month
• Internal feedback multipliers facilitate various Feedback resolutions of: 0.0005 mm, 0.001 mm, 0.002 mm, 0.0025 mm, 0.005 mm 0.01 mm per pulse or 0.00005 in, 0.0001 in, 0.0002 in, 0.00025 in, 0.0005 in, 0.001 in per pulse
• MSD parameters may be entered using keyboard or from a PC using serial port
• MSD parameters are displayed in an easy-to-read menu for simple selection and entry
• Standard and Parametric Subroutines
• Standard and user defined Canned Cycles * BCD Output for M2 functions and T2 functions
• Spindle orientation * BCD Output for S2 or S4 functions
• Scaling * 15 decoded "M" outputs parametrically defined and
• Geometric aids simplify programming assignable to 32 M codes
• Optical Encoder or Scale feedback * Cyc On, Jog Mode, Threadcutting On, Axes Enable,
• Graphic programming assistance Emergency and Reset Outputs
• DNC/ Simultaneous programming
• Optical Encoder or Scale feedback Operation
• Metric or inch feedback is selectable by MSD * Manual data entry via keyboard
• Operator-friendly, menu driven program input * Part Program editing
• Metric / inch programming * Absolute / Incremental programming
• Operation Modes
• Auto, Single Block, Dry Run, Jog / Zero setting, Editing, Peripherals, Tool Offsets, Special Modes
• Direct Feedrate programming
• Programmable Dwell * Feedrate Override (0 to 100%)
• Programmable zero offset by G92 * Spindle Speed Override (50 to 120%)
• Two axes simultaneous rapid traverse (G00) * Continuous and Incremental Jog
• Up to 30 m/min without controlled path * MPG Interface
• Full spindle control 1 to 9999 rpm * Tool Inspection during program execution
• S4 for analog control
• S2 or S4 output in BCD Programming
• Spindle Creep command for gear and tool changes * Program entry in ISO code & Assisted program entry
• Math functions, conditional jumps * RS232 (V24) port for PC communication and DNC
• 32 tool offset files (length and wear compensation, * Programmable Feed Rate and Spindle Speed
• Location code and tool radius) * Number of Main Programms: 250
• Tool Compensation * Number of Repetitions of subprograms: 99,99
• Programmable Position Loop Gain * Number of Repetitions of Para. Subroutines: 99,99
• Lag Limit Protection
• Manual Zero Offsets (G53 - G59) * Self Dignostics
• Programming, Overtemprature and Hardware Errors
• Radius / Diameter Programming for X axis
• Spindle Speed Display - requires encoder * Interface Errors
• Conditional input for M01 and Conditional Blocks * Software Travel Limits
• Leadscrew Backlash Compensation * Transmission Errors

Send Enquiry

Our company offers a wide range of PWM DC Servo Drive (Model - DSn), which have a capacity up to 250 V DC and 100 A. The PWM close loop control technology in it offers higher reliability and accuracy in positioning applications and improves the performance of the drive and the plug in type pre-driver section on the power card make the power cards easily serviceable.

Features:

• These drives are sturdy, simple and very easy to use.
• The over current protection, under-over voltage protection, drive Inhibit function and a potential free Monitor Voltage Relay ( MVR) available with this drive, really assures hazard free smooth operation

Applications:

• These drives can be used as direct replacement to HIAK DC Servo drives
• Suitable to any standard PM DC motor and CNC controller for axis positioning in all types of machines and robotics
• Suitable for winding machine control applications

Send Enquiry

We are supplying a wide range of  Brush Less DC Servo Drive (AC Servo Drive) (Model - BDSn), which have a built-in fully automatic notch filter to remove the system’s resonance frequency. These have  power sections kept separated for logic/signal and power electronics.

Features:

·    
Closed-loop integrated system with  Speed and Torque control mode

·     Scale factor that can be set by the user on both analog and frequency inputs and on the repetition of the encoder signal

·      PNP/NPN/Differential frequency interface, with digital filter that can be configured by the user for noise immunity

·      Integrated management of overtravel signals 

·     Built-in fully automatic notch filter to remove the system’s resonance frequency

·     Control: with  analog signal (proportional to Speed or Torque)  Optically coupled digital control I/O.3 inputs and 2 outputs with user-defined functions

·     External regenerative resistor provided with sensing for maximum temperature alarm (optional)

·     200VAC to 230VAC Power Supply [+10%; –15%], single-phase or three-phase (can be set by operator)

·     Power sections kept separated for logic/signal and power electronics

·     Built-in protection circuits against any overload, input overvoltage and any motor connection error (wrong encoder wiring, phase-phase and phase-ground short-circuit)

·      

·     Dynamic braking circuit activated when the power section is not powered or in case of alarm.

Send Enquiry

Our company is offering a wide range of Digital Readouts (DRO) (Model - RDn), which enables in installing and operating DRO very easier. These are renowned for high end features such as accuracy, low maintenance and low power consumption.

Send Enquiry